If your home’s heating and cooling unit isn’t working, there are a few things you can do to troubleshoot the issue. Check the power receptacles to make sure they’re properly plugged in.
Next, check the wiring to see if it’s loose or damaged. If all of those checks come up clean, then it may be a problem with the unit itself.
In that case, you’ll need to take it into a technician for diagnosis.
Table of Contents
Check the thermostat to make sure it is turned on and set to heat.
In order to troubleshoot when your HVAC unit is not blowing any heat, you first need to make sure that the unit is turned on and set to heat. Next, you want to check the thermostat to make sure it is set at the correct temperature. If the thermostat is set at the correct temperature, but the unit still isn’t blowing any heat, then you may have a problem with the unit’s fan or coil.
In this case, you will need to contact a qualified technician in order to fix the issue.
If the thermostat is on and set to heat, check to see if there is power to the unit. If not, check for a blown fuse or circuit breaker.
If the thermostat is on and set to heat, check to see if there is power to the unit. If not, check for a blown fuse or circuit breaker.
If the power is still not coming on, then it may be necessary to call a professional.
If there is power to the unit, check to see if the furnace switch is turned on.
If there is power to the unit, check to see if the furnace switch is turned on. If the switch is not on, then the HVAC unit may be broken.
To test if the switch is working, turn off all other devices in the house and try to turn on the furnace using the switch. If it works, then your HVAC unit may just need a new switch.
If it does not work, then your HVAC unit may be broken and you will need to have it fixed or replaced.
If the furnace switch is on, check for a clogged air filter.
If the furnace switch is on, check for a clogged air filter. If the filter is clean and there is no blockage in the ducts, it may be necessary to replace the furnace filter.
If the filter is dirty or if there is a blockage in the ducts, the furnace may need to be serviced.
If the air filter is clean, check to see if the blower belt is broken.
If the air filter is clean, check to see if the blower belt is broken. If the belt is not broken, then you may have a clogged air filter.
To clean the air filter, remove the cover and wash it in warm soapy water. Dry it off and replace it.
If the belt is broken, the machine will not be able to move enough air and heat will not be delivered to your home. In this case, you will need to replace the belt.
If the blower belt is not broken, check to see if there is a problem with the blower motor.
If the blower belt is not broken, check to see if there is a problem with the blower motor. Motor failure can be caused by a number of issues, including worn or broken bearings, electrical problems, and debris buildup.
In order to diagnose the issue, you will need to remove the cover plate on the motor and take a look inside. If you notice any damaged or worn parts, you will need to replace the motor.